Also check out my review of the Phrozen Sonic Mini.
Phrozen Sonic Mini 3D Resin Settings
Brand | Resin_Version/Type | UV_Resin_Color | Layer Height | Bottom Layer Count | Exposure Time | Bottom Exposure Time | Light Off Delay | Bottom Light Off Delay | Bottom Lift Distance | Lifting Distance | Bottom Lift Speed | Lifting Speed | Retract Speed | Reported_By:(Thanks!) | Link | Additional_Notes_on_3D_Resins |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Anycubic | Translucent Resin | Translucent Green | 0.05 | 6 | 2s | 25s | 7s | Michael Randle | Anycubic | None | ||||||
Elegoo | Water Washable Rapid Resin | Ceramic Grey | 0.05 | 6 | 2s | 25s | 7s | Michael Randle | Amazon | No product listing at Elegoo | ||||||
Elegoo | Rapid Resin | Black | 0.05 | 6 | 2s | 25s | 7s | Michael Randle | Elegoo | None | ||||||
Siraya Tech | Blu | Translucent Blue (?) | 0.05 | 4 | 4.1s | 8s | ? | ? | 6 | 6 | 30 | 30 | 100 | DefMech | Amazon | No product listing on Siraya Tech |
eSun | eResin Bio-Photopolymer | Black | 0.05 | 6 | 6s | 25s | Jared Newall | ESun | None |
Please leave comments and I’ll add or edit the list. To be added please be sure to specify each field.
This table grew from a post on Reddit. Thanks to DefMech and Dont_Be_Like_That!
eSun eResin Bio-Photopolymer, Black
Layer Height: 0.05mm
Bottom Layer Count: 6
Exposure time: 6s
Bottom Layer Exposure Time: 25s
Link: http://www.esun3d.net/products/469.html
Notes: Less than 6 second exposure time caused delamination in my prints.
Printer: Phrozen Sonic Mini
Bed Settings: X 67.6, y 120.48, Z 130.
iFun High Clear Transparent HiTemp 405nm LCD DLP Printer SLA
Layer Height: 0.05mm
Bottom Layer Count: 6
Bottom Layer Exposure Time: 25s
Bottom Lift Speed: 60 mm/min
Exposure time: 7s (4-6 secs works ok, but shorter times result in substantial decreased detail on thin features (less than 0.5mm) of the BJA-11.stl )
Lifting Speed: 50mm/min (time at 20 mm/min tested, but without noticeable difference on fine feature quality)
Lifting Distance: 3
Light off delay and bottom light off delay: 7
Layer Height: 0.03mm
Bottom Layer Count: 6
Bottom Layer Exposure Time: 12s
Bottom Lift Speed: 60 mm/min
Exposure time: 6s (4.5 secs works ok, but shorter times results decreased detail on thin features (less than 0.5mm) of the BJA-11.stl )
Lifting Speed: 50mm/min (time at 20 mm/min tested, but without noticeable difference on fine feature quality)
Lifting Distance: 3
Light off delay and bottom light off delay: 7
iFUN Clear Resources / Test Models Used:
BJA-11.stl, scaled to 80 x 40 mm : http://www.instructables.com/id/How-to-tune-Embers-print-settings-for-new-resins/
form test print2.stl, flipped to print directly on the resin tank film http://www.instructables.com/id/Making-a-Working-Curve-Measurement-on-the-Form1/
Exposure Calculator: http://www.instructables.com/id/How-to-Take-a-Working-Curve-Measurement-and-Create/
Resin Link: http://www.ifun3d.com/product/ifun-3d-printer-resin-clear-405nm-hiclear-hitemp-lcd-dlp-printer-sla-uv-cure-3d-print-liquid-photopolymer-resin-1kg/
Other notes: Instruction provided by mfg. about getting a really transparent model seem about right; specifically don’t rinse the model for long, if at all before clear coat/ curing.
do you have the settings for the aqua blue for the phrozen mini sonic 4k?
layer height: 0.05
retract speed: 150
bottom light off delay: 9
bottom layer count: 6
bottom exposure time: 25
bottom lift distance: 6
bottom lifting speed: 80
exposure time: 2-2.5
lifting distance: 5
lifting speed: 80