Linux to 3D Printing and Back Again
I’ve finally decided to pull my PinePhone Braveheart edition out of it’s box and plug it in. There’s a task for it; acting as an LTE hotspot through a USB tether for the network. That’ll plug into a tiny Atom based SFF computer running OpenWRT… but that’s a write-up for another day. On with fixing…
During the late 1970’s arcade games were just coming into vogue. Capitalizing on the trend General Instruments released their “Pong on a chip”, the AY-3-8500 and it was picked up for the Sears Tele-Games console.
.I’m now faced with a slight dilemma. The 3D scanner table has been modified for a 608 bearing and printed out. And as it turns out the 608 bearings I intended to use are a gummed up with shipping oil. Should we clean out the bearings with Acetone? Or just drown them in some PTFE…